Програмная эмуляция нажатия клавиш

Материал из DRKB

Программная эмуляция нажатия клавиш[править | править код]

Использование клавиш для управления компонентами[править | править код]

Так, если у меня есть своего рода кнопка (check, radio, speed и т.п.), то почему я не могу с помощью клавиш курсора управлять ею?

После некоторых экспериметов я создал метод, который привожу ниже, способный перехватывать в форме все нажатые клавиши позиционирования и управлять ими выбранным в настоящий момент элементом управления. Имейте в виду, что элементы управления (кроме компонентов Label) должны иметь возможность "выбираться". Для возможности выбрать GroupBox или другой компонент, удедитесь, что их свойство TabStop установлено в True. Вы можете переместить управление на GroupBox, но, так как он не выделяется целиком, узнать, что он действительно имеет управление, достаточно непросто. Если вам не нужно передавать управление в контейнерные элементы (нижеследующий код исходит из этого предположения), то вы можете управлять элементами, просто перемещая управление в сам GroupBox.

В нижеследующем коде FormActivate является обработчиком события формы OnActivate, тогда как ProcessFormMessages никакого отношения к событиям формы не имеет. Не забудьте поместить объявление процедуры ProcessFormMessages в секцию 'Private' класса вашей формы.

Надеюсь, что вам помог.


procedure TForm1.FormActivate(Sender: TObject);
begin
  { Делаем ссылку на нового обработчика сообщений }
  Application.OnMessage := ProcessFormMessages;
end;

procedure TForm1.ProcessFormMessages(var Msg: TMsg; var Handled: Boolean);
var
  Increment: Byte;
  TheControl: TWinControl;
begin
  { проверка наличия системного сообщения KeyDown }
  case Msg.Message of
    WM_KEYDOWN:
      if Msg.wParam in [VK_UP, VK_DOWN, VK_LEFT, VK_RIGHT] then
      begin
        { изменяем величину приращения в зависимости
        от состояния клавиши Shift }
        if GetKeyState(VK_SHIFT) and $80 = 0 then
          Increment := 8
        else
          Increment := 1;

        { Этот код перемещает управление на родительский
        GroupBox, если один из его контейнерных элементов
        получает фокус. Если вам необходимо управлять
        элементами внутри контейнера, удалите блок IF и
        измените в блоке CASE TheControl на ActiveControl }

        if (ActiveControl.Parent is TGroupBox) then
          TheControl := ActiveControl.Parent
        else
          TheControl := ActiveControl;

        case Msg.wParam of
          VK_UP: TheControl.Top := TheControl.Top - Increment;
          VK_DOWN: TheControl.Top := TheControl.Top + Increment;
          VK_LEFT: TheControl.Left := TheControl.Left - Increment;
          VK_RIGHT: TheControl.Left := TheControl.Left + Increment;
        end;

        { сообщаем о том, что сообщение обработано }
        Handled := True;
      end;
  end;
end;


Author: Robert Wittig
Source: http://delphiworld.narod.ru/
ID: 01536



Как посылать нажатие клавиш в элемент управления[править | править код]

Ниже приведена процедура, позволяющая отправлять нажатия в любой элемент управления (window control), способный принимать ввод с клавиатуры. Вы можете использовать эту технику чтобы включать клавиши NumLock, CapsLock и ScrollLock под Windows NT. Та же техника работает и под Windows 95 для CapsLock и ScrollLock но не работает для клавиши NumLock.

Обратите внимание, что приведены четыре процедуры: SimulateKeyDown() - эмулировать нажатие клавиши (без отпускания) SimulateKeyUp() - эмулировать отпускание клавиши SimulateKeystroke() - эмулировать удар по клавише (нажатие и отпускание) и SendKeys(), позволяющие Вам гибко контролировать посылаемые сообщения клавиатуры.

SimulateKeyDown(), SimulateKeyUp() и SimulateKeystroke() получают коды виртуальных клавиш (virtural key) (вроде VK_F1). Процедура SimulateKeystroke() получает дополнительный параметр, полезный при эмуляции нажатия PrintScreen. Когда этот параметр равен нулю весь экран будет скопирован в буфер обмена (clipboard). Если дополнительный параметр равен 1 будет скопировано только активное окно.

Четыре метода "button click" демонстрируют использование: ButtonClick1 - включает capslock ButtonClick2 - перехватывает весь экран в буфер обмена (clipboard). ButtonClick3 - перехватывает активное окно в буфер обмена (clipboard). ButtonClick4 - устанавливает фокус в Edit и отправляет в него строку.


procedure SimulateKeyDown(Key: byte);
begin
  keybd_event(Key, 0, 0, 0);
end;

procedure SimulateKeyUp(Key: byte);
begin
  keybd_event(Key, 0, KEYEVENTF_KEYUP, 0);
end;

procedure SimulateKeystroke(Key: byte; extra: DWORD);
begin
  keybd_event(Key, extra, 0, 0);
  keybd_event(Key, extra, KEYEVENTF_KEYUP, 0);
end;

procedure SendKeys(s: string);
var
  i: integer;
  flag: bool;
  w: word;
begin
  { Get the state of the caps lock key }
  flag := not GetKeyState(VK_CAPITAL) and 1 = 0;
  { If the caps lock key is on then turn it off }
  if flag then
    SimulateKeystroke(VK_CAPITAL, 0);
  for i := 1 to Length(s) do
  begin
    w := VkKeyScan(s[i]);
    { If there is not an error in the key translation }
    if ((HiByte(w) $FF) and (LoByte(w) $FF)) then
    begin
      { If the key requires the shift key down - hold it down }
      if HiByte(w) and 1 = 1 then
        SimulateKeyDown(VK_SHIFT);
      { Send the VK_KEY }
      SimulateKeystroke(LoByte(w), 0);
      { If the key required the shift key down - release it }
      if HiByte(w) and 1 = 1 then
        SimulateKeyUp(VK_SHIFT);
    end;
  end;
  { if the caps lock key was on at start, turn it back on }
  if flag then
    SimulateKeystroke(VK_CAPITAL, 0);
end;

procedure TForm1.Button1Click(Sender: TObject);
begin
  { Toggle the cap lock }
  SimulateKeystroke(VK_CAPITAL, 0);
end;

procedure TForm1.Button2Click(Sender: TObject);
begin
  { Capture the entire screen to the clipboard }
  { by simulating pressing the PrintScreen key }
  SimulateKeystroke(VK_SNAPSHOT, 0);
end;

procedure TForm1.Button3Click(Sender: TObject);
begin
  { Capture the active window to the clipboard }
  { by simulating pressing the PrintScreen key }
  SimulateKeystroke(VK_SNAPSHOT, 1);
end;

procedure TForm1.Button4Click(Sender: TObject);
begin
  { Set the focus to a window (edit control) and send it a string }
  Application.ProcessMessages;
  Edit1.SetFocus;
  SendKeys('Delphi World is REALY BEST');
end;


Language: en
Source: http://delphiworld.narod.ru/
ID: 01537



К сожалению работает хорошо, только когда фокус у вызывающего окна, в противном случае может глючить


procedure TForm1.SetKey(Key: Integer);
begin
  keybd_event(Key, 0, KEYEVENTF_EXTENDEDKEY or KEYEVENTF_KEYUP, 0);
  keybd_event(Key, 0, KEYEVENTF_EXTENDEDKEY, 0);
  keybd_event(Key, 0, KEYEVENTF_EXTENDEDKEY or KEYEVENTF_KEYUP, 0);
end;


Применение

SetKey(VK_SCROLL);
SetKey(VK_CAPITAL);


Source: http://delphiworld.narod.ru/
ID: 01538



Послать нажатие клавиш[править | править код]

unit Main;

interface

uses
  SysUtils, Windows, Messages, Classes, Graphics, Controls,
  Forms, Dialogs, StdCtrls, Menus;

type
  TForm1 = class(TForm)
    Edit1: TEdit;
    Edit2: TEdit;
    Button1: TButton;
    Button2: TButton;
    MainMenu1: TMainMenu;
    File1: TMenuItem;
    Open1: TMenuItem;
    Exit1: TMenuItem;
    Button4: TButton;
    Button3: TButton;
    procedure Button1Click(Sender: TObject);
    procedure Button2Click(Sender: TObject);
    procedure Open1Click(Sender: TObject);
    procedure Exit1Click(Sender: TObject);
    procedure Button4Click(Sender: TObject);
    procedure FormDestroy(Sender: TObject);
    procedure Button3Click(Sender: TObject);
  private
    { Private declarations }
  public
    { Public declarations }
  end;

var
  Form1: TForm1;

implementation

{$R *.DFM}

uses SendKey, KeyDefs;

procedure TForm1.Button1Click(Sender: TObject);
begin
  Edit1.SetFocus; // focus Edit1
  SendKeys('^{DELETE}I love...'); // send keys to Edit1
  WaitForHook; // let keys playback
  Perform(WM_NEXTDLGCTL, 0, 0); // move to Edit2
  SendKeys('~delphi ~developers ~guide!'); // send keys to Edit2
end;

procedure TForm1.Button2Click(Sender: TObject);
var
  H: hWnd;
  PI: TProcessInformation;
  SI: TStartupInfo;
begin
  FillChar(SI, SizeOf(SI), 0);
  SI.cb := SizeOf(SI);
  { Invoke notepad }
  if CreateProcess(nil, 'notepad', nil, nil, False, 0, nil, nil, SI, PI) then
  begin
    { wait until notepad is ready to receive keystrokes }
    WaitForInputIdle(PI.hProcess, INFINITE);
    { find new notepad window }
    H := FindWindow('Notepad', 'Untitled - Notepad');
    if SetForegroundWindow(H) then // bring it to front
      SendKeys('Hello from the Delphi Developers Guide SendKeys ' +
        'example!{ENTER}'); // send keys!
  end
  else
    MessageDlg(Format('Failed to invoke Notepad.  Error code %d',
      [GetLastError]), mtError, [mbOk], 0);
end;

procedure TForm1.Open1Click(Sender: TObject);
begin
  ShowMessage('Open');
end;

procedure TForm1.Exit1Click(Sender: TObject);
begin
  Close;
end;

procedure TForm1.Button4Click(Sender: TObject);
begin
  WaitForInputIdle(GetCurrentProcess, INFINITE);
  SendKeys('@fx');
end;

procedure TForm1.FormDestroy(Sender: TObject);
begin
  WaitForHook;
end;

procedure TForm1.Button3Click(Sender: TObject);
begin
  WaitForInputIdle(GetCurrentProcess, INFINITE);
  SendKeys('@fo');
end;

end.


Source: http://delphiworld.narod.ru/
ID: 01539



Послать нажатие клавиш в программу Блокнот[править | править код]

procedure TForm1.Button1Click(Sender: TObject);
var
  wnd: HWND;
  i: Integer;
  s: string;
begin
  wnd := FindWindow('notepad', nil);
  if wnd <> 0 then
  begin
    wnd := FindWindowEx(wnd, 0, 'Edit', nil);

   // Write Text in Notepad.
   // Text ins Notepad schreiben.
   s := 'Hello';
   for i := 1 to Length(s) do
     SendMessage(wnd, WM_CHAR, Word(s[i]), 0);
   // Simulate Return Key.
   PostMessage(wnd, WM_KEYDOWN, VK_RETURN, 0);
   // Simulate Space.
   PostMessage(wnd, WM_KEYDOWN, VK_SPACE, 0);
  end;
end;


// To send keys to Wordpad:
begin
  wnd := FindWindow('WordPadClass', nil);

  if wnd <> 0 then
  begin
    wnd := FindWindowEx(wnd, 0, 'RICHEDIT', nil);
  end;
end.


Source: Взято с сайта: http://www.swissdelphicenter.ch
ID: 01540



Компонент Sendkeys - посылаем нажатия клавиш другому приложению[править | править код]

Описание
Данный компонент получает хэндл(handle) любого запущенного окна и даёт возможность отправить по указанному хэндлу любые комбинации нажатия клавиш.
Совместимость
Все версии Delphi

Собственно сам исходничек:

unit SendKeys;

interface

uses
  Windows, Messages, SysUtils, Classes, Graphics, Controls, Forms, Dialogs;

type
  TSendKeys = class(TComponent)
  private
    FHandle: HWND;
    L: Longint;
    FChild: boolean;
    FChildText: string;
    procedure SetIsChildWindow(const Value: boolean);
    procedure SetChildText(const Value: string);
    procedure SetWindowHandle(const Value: HWND);
  protected

  public

  published
    procedure GetWindowHandle(Text: string);
    procedure SendKeys(buffer: string);
    property WindowHandle: HWND read FHandle write SetWindowHandle;
    property IsChildWindow: boolean read FChild write SetIsChildWindow;
    property ChildWindowText: string read FChildText write SetChildText;
  end;

procedure Register;

implementation

var
  temps: string; {й utilizado para ser acessivel pelas funcs q sao utilizadas como callbacks}
  HTemp: Hwnd;
  ChildText: string;
  ChildWindow: boolean;

procedure Register;
begin
  RegisterComponents('Standard', [TSendKeys]);
end;

{ TSendKeys }

function PRVGetChildHandle(H: HWND; L: Integer): LongBool;
var
  p: PChar;
  I: Integer;
  s: string;
begin
  I := Length(ChildText) + 2;
  GetMem(p, i + 1);
  SendMessage(H, WM_GetText, i, Integer(p));
  s := StrPCopy(p, s);
  if Pos(ChildText, s) <> 0 then
  begin
    HTemp := H;
    Result := False
  end
  else
    Result := True;
  FreeMem(p);
end;

function PRVSendKeys(H: HWND; L: Integer): LongBool; stdcall;
var
  s: string;
  i: Integer;
begin
  i := Length(temps);
  if i <> 0 then
  begin
    SetLength(s, i + 2);
    GetWindowText(H, PChar(s), i + 2);
    if Pos(temps, string(s)) <> 0 then
    begin
      Result := False;
      if ChildWindow then
        EnumChildWindows(H, @PRVGetChildHandle, L)
      else
        HTemp := H;
    end
    else
      Result := True;
  end
  else
    Result := False;
end;

procedure TSendKeys.GetWindowHandle(Text: string);
begin
  temps := Text;
  ChildText := FChildText;
  ChildWindow := FChild;
  EnumWindows(@PRVSendKeys, L);
  FHandle := HTemp;
end;

procedure TSendKeys.SendKeys(buffer: string);
var
  i: integer;
  w: word;
  D: DWORD;
  P: ^DWORD;
begin
  P := @D;
  // get flashing timeout on win98
  SystemParametersInfo(SPI_GETFOREGROUNDLOCKTIMEOUT, 0, P, 0);
  SetForeGroundWindow(FHandle);
  for i := 1 to length(buffer) do
  begin
    w := VkKeyScan(buffer[i]);
    keybd_event(w, 0, 0, 0);
    keybd_event(w, 0, KEYEVENTF_KEYUP, 0);
  end;
  // set flashing TimeOut=0
  SystemParametersInfo(SPI_SETFOREGROUNDLOCKTIMEOUT, 0, nil, 0);
  SetForegroundWindow(TWinControl(TComponent(Self).Owner).Handle);
  // ->typecast working...
  // set flashing TimeOut=previous value
  SystemParametersInfo(SPI_SETFOREGROUNDLOCKTIMEOUT, D, nil, 0);
end;

procedure TSendKeys.SetChildText(const Value: string);
begin
  FChildText := Value;
end;

procedure TSendKeys.SetIsChildWindow(const Value: boolean);
begin
  FChild := Value;
end;

procedure TSendKeys.SetWindowHandle(const Value: HWND);
begin
  FHandle := WindowHandle;
end;

end.


После того, как проинсталируете этот компонент, создайте новое приложение и поместите на форму кнопку и сам компонент SendKeys. Добавьте следующий код в обработчик события OnClick кнопки:


procedure TForm1.Button1Click(Sender: TObject);
begin
  // Запускаем Notepad, и ему мы будем посылать нажатия клавиш
  WinExec('NotePad.exe', SW_SHOW);
  // В параметре процедуры GetWindowHandle помещаем
  // текст заголовка окна Notepad'а.
  SendKeys1.GetWindowHandle('Untitled - Notepad');
  // Если хэндл окна получен успешно, то отправляем ему текст
  if SendKeys1.WindowHandle <> 0 then
    SendKeys1.SendKeys('This is a test');
  // Так же можно отправить код любой кнопки типа
  // RETURN, используя следующий код:
  // SendKeys1.SendKeys(Chr(13));
end;


Неправда ли весело :)


Author: Gert v.d. Venis
Source: Взято из http://forum.sources.ru
ID: 01541



Посылка кода клавиши или текста в окно[править | править код]

unit Unit1;

interface

uses
  SysUtils, WinTypes, WinProcs, Messages, Classes, Graphics, Controls,
  Forms, Dialogs, StdCtrls;

type
  TForm1 = class(TForm)
    Button1: TButton;
    Button2: TButton;
    procedure Button1Click(Sender: TObject);
    procedure Button2Click(Sender: TObject);
    procedure FormKeyPress(Sender: TObject; var Key: Char);
  private
    AppInst: THandle;
    AppWind: THandle;
  public
    { Public declarations }
  end;

var
  Form1: TForm1;

implementation

{$R *.DFM}

uses ShellAPI;

procedure SendShift(H: HWnd; Down: Boolean);
var
  vKey, ScanCode, wParam: Word;
  lParam: longint;
begin
  vKey := $10;
  ScanCode := MapVirtualKey(vKey, 0);
  wParam := vKey or ScanCode shl 8;
  lParam := longint(ScanCode) shl 16 or 1;
  if not (Down) then
    lParam := lParam or $C0000000;
  SendMessage(H, WM_KEYDOWN, vKey, lParam);
end;

procedure SendCtrl(H: HWnd; Down: Boolean);
var
  vKey, ScanCode, wParam: Word;
  lParam: longint;
begin
  vKey := $11;
  ScanCode := MapVirtualKey(vKey, 0);
  wParam := vKey or ScanCode shl 8;
  lParam := longint(ScanCode) shl 16 or 1;
  if not (Down) then
    lParam := lParam or $C0000000;
  SendMessage(H, WM_KEYDOWN, vKey, lParam);
end;

procedure SendKey(H: Hwnd; Key: char);
var
  vKey, ScanCode, wParam: Word;
  lParam, ConvKey: longint;
  Shift, Ctrl: boolean;
begin
  ConvKey := OemKeyScan(ord(Key));
  Shift := (ConvKey and $00020000) <> 0;
  Ctrl := (ConvKey and $00040000) <> 0;
  ScanCode := ConvKey and $000000FF or $FF00;
  vKey := ord(Key);
  wParam := vKey;
  lParam := LongInt(ScanCode) shl 16 or 1;
  if Shift then
    SendShift(H, true);
  if Ctrl then
    SendCtrl(H, true);
  SendMessage(H, WM_KEYDOWN, vKey, lParam);
  SendMessage(H, WM_CHAR, vKey, lParam);
  lParam := lParam or $C0000000;
  SendMessage(H, WM_KEYUP, vKey, lParam);
  if Shift then
    SendShift(H, false);
  if Ctrl then
    SendCtrl(H, false);
end;

function EnumFunc(Handle: HWnd; TF: TForm1): Bool; far;
begin
  TF.AppWind := 0;
  if GetWindowWord(Handle, GWW_HINSTANCE) = TF.AppInst then
    TF.AppWind := Handle;
  Result := (TF.AppWind = 0);
end;

procedure TForm1.Button1Click(Sender: TObject);
var
  Text: array[0..255] of char;
begin
  AppInst := ShellExecute(Handle, 'open', 'notepad.exe', nil, '', SW_NORMAL);
  EnumWindows(@EnumFunc, longint(self));
  AppWind := GetWindow(AppWind, GW_CHILD);
end;

procedure TForm1.Button2Click(Sender: TObject);
begin
  SendKey(AppWind, 'T');
  SendKey(AppWind, 'e');
  SendKey(AppWind, 's');
  SendKey(AppWind, 't');
end;

procedure TForm1.FormKeyPress(Sender: TObject; var Key: Char);
begin
  if AppWind <> 0 then
    SendKey(AppWind, Key);
end;

end.


Source: http://delphiworld.narod.ru/
ID: 01542



Почти полный аналог метода SendKeys из VB[править | править код]

{
SendKeys routine for 32-bit Delphi.

Written by Ken Henderson

Copyright (c) 1995 Ken Henderson     email:khen@compuserve.com

This unit includes two routines that simulate popular Visual Basic
routines: Sendkeys and AppActivate.  SendKeys takes a PChar
as its first parameter and a boolean as its second, like so:

SendKeys('KeyString', Wait);

where KeyString is a string of key names and modifiers that you want
to send to the current input focus and Wait is a boolean variable or value
that indicates whether SendKeys should wait for each key message to be
processed before proceeding.  See the table below for more information.

AppActivate also takes a PChar as its only parameter, like so:

AppActivate('WindowName');

where WindowName is the name of the window that you want to make the
current input focus.

SendKeys supports the Visual Basic SendKeys syntax, as documented below.

Supported modifiers:

+ = Shift
^ = Control
% = Alt

Surround sequences of characters or key names with parentheses in order to
modify them as a group.  For example, '+abc' shifts only 'a', while  '+(abc)' shifts
all three characters.

Supported special characters

~ = Enter
( = begin modifier group (see above)
) = end modifier group (see above)
{ = begin key name text (see below)
} = end key name text (see below)

Supported characters:

Any character that can be typed is supported.  Surround the modifier keys
listed above with braces in order to send as normal text.

Supported key names (surround these with braces):

BKSP, BS, BACKSPACE
BREAK
CAPSLOCK
CLEAR
DEL
DELETE
DOWN
END
ENTER
ESC
ESCAPE
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11
F12
F13
F14
F15
F16
HELP
HOME
INS
LEFT
NUMLOCK
PGDN
PGUP
PRTSC
RIGHT
SCROLLLOCK
TAB
UP

Follow the keyname with a space and a number to send the specified key a
given number of times (e.g., {left 6}).
}

unit sndkey32;

interface

uses SysUtils, Windows, Messages;

function SendKeys(SendKeysString: PChar; Wait: Boolean): Boolean;
function AppActivate(WindowName: PChar): boolean;

{ Buffer for working with PChar's }

const
  WorkBufLen = 40;
var
  WorkBuf: array[0..WorkBufLen] of Char;

implementation
type
  THKeys = array[0..pred(MaxLongInt)] of byte;
var
  AllocationSize: integer;

(*
Converts a string of characters and key names to keyboard events and
passes them to Windows.

Example syntax:

SendKeys('abc123{left}{left}{left}def{end}456{left 6}ghi{end}789', True);

*)

function SendKeys(SendKeysString: PChar; Wait: Boolean): Boolean;
type
  WBytes = array[0..pred(SizeOf(Word))] of Byte;

  TSendKey = record
    Name: ShortString;
    VKey: Byte;
  end;

const
  { Array of keys that SendKeys recognizes.

  If you add to this list, you must be sure to keep it sorted alphabetically
  by Name because a binary search routine is used to scan it. }

  MaxSendKeyRecs = 41;
  SendKeyRecs : array[1..MaxSendKeyRecs] of TSendKey =
  (
   (Name:'BKSP';            VKey:VK_BACK),
   (Name:'BS';              VKey:VK_BACK),
   (Name:'BACKSPACE';       VKey:VK_BACK),
   (Name:'BREAK';           VKey:VK_CANCEL),
   (Name:'CAPSLOCK';        VKey:VK_CAPITAL),
   (Name:'CLEAR';           VKey:VK_CLEAR),
   (Name:'DEL';             VKey:VK_DELETE),
   (Name:'DELETE';          VKey:VK_DELETE),
   (Name:'DOWN';            VKey:VK_DOWN),
   (Name:'END';             VKey:VK_END),
   (Name:'ENTER';           VKey:VK_RETURN),
   (Name:'ESC';             VKey:VK_ESCAPE),
   (Name:'ESCAPE';          VKey:VK_ESCAPE),
   (Name:'F1';              VKey:VK_F1),
   (Name:'F10';             VKey:VK_F10),
   (Name:'F11';             VKey:VK_F11),
   (Name:'F12';             VKey:VK_F12),
   (Name:'F13';             VKey:VK_F13),
   (Name:'F14';             VKey:VK_F14),
   (Name:'F15';             VKey:VK_F15),
   (Name:'F16';             VKey:VK_F16),
   (Name:'F2';              VKey:VK_F2),
   (Name:'F3';              VKey:VK_F3),
   (Name:'F4';              VKey:VK_F4),
   (Name:'F5';              VKey:VK_F5),
   (Name:'F6';              VKey:VK_F6),
   (Name:'F7';              VKey:VK_F7),
   (Name:'F8';              VKey:VK_F8),
   (Name:'F9';              VKey:VK_F9),
   (Name:'HELP';            VKey:VK_HELP),
   (Name:'HOME';            VKey:VK_HOME),
   (Name:'INS';             VKey:VK_INSERT),
   (Name:'LEFT';            VKey:VK_LEFT),
   (Name:'NUMLOCK';         VKey:VK_NUMLOCK),
   (Name:'PGDN';            VKey:VK_NEXT),
   (Name:'PGUP';            VKey:VK_PRIOR),
   (Name:'PRTSC';           VKey:VK_PRINT),
   (Name:'RIGHT';           VKey:VK_RIGHT),
   (Name:'SCROLLLOCK';      VKey:VK_SCROLL),
   (Name:'TAB';             VKey:VK_TAB),
   (Name:'UP';              VKey:VK_UP)
  );

  { Extra VK constants missing from Delphi's Windows API interface }
  VK_NULL=0;
  VK_SemiColon=186;
  VK_Equal=187;
  VK_Comma=188;
  VK_Minus=189;
  VK_Period=190;
  VK_Slash=191;
  VK_BackQuote=192;
  VK_LeftBracket=219;
  VK_BackSlash=220;
  VK_RightBracket=221;
  VK_Quote=222;
  VK_Last=VK_Quote;

  ExtendedVKeys: set of byte =
  [VK_Up,
   VK_Down,
   VK_Left,
   VK_Right,
   VK_Home,
   VK_End,
   VK_Prior,  {PgUp}
   VK_Next,   {PgDn}
   VK_Insert,
   VK_Delete];

const
  INVALIDKEY = $FFFF {Unsigned -1};
  VKKEYSCANSHIFTON = $01;
  VKKEYSCANCTRLON = $02;
  VKKEYSCANALTON = $04;
  UNITNAME = 'SendKeys';
var
  UsingParens, ShiftDown, ControlDown, AltDown, FoundClose: Boolean;
  PosSpace: Byte;
  I, L: Integer;
  NumTimes, MKey: Word;
  KeyString: String[20];

  procedure DisplayMessage(Message: PChar);
  begin
    MessageBox(0, Message, UNITNAME, 0);
  end;

  function BitSet(BitTable, BitMask: Byte): Boolean;
  begin
    Result := ByteBool(BitTable and BitMask);
  end;

  procedure SetBit(var BitTable: Byte; BitMask: Byte);
  begin
    BitTable := BitTable or Bitmask;
  end;

  procedure KeyboardEvent(VKey, ScanCode: Byte; Flags: Longint);
  var
    KeyboardMsg: TMsg;
  begin
    keybd_event(VKey, ScanCode, Flags,0);
    if (Wait) then
      while (PeekMessage(KeyboardMsg, 0, WM_KEYFIRST, WM_KEYLAST, PM_REMOVE)) do
      begin
        TranslateMessage(KeyboardMsg);
        DispatchMessage(KeyboardMsg);
      end;
  end;

  procedure SendKeyDown(VKey: Byte; NumTimes: Word; GenUpMsg: Boolean);
  var
    Cnt: Word;
    ScanCode: Byte;
    NumState: Boolean;
    KeyBoardState: TKeyboardState;
  begin
    if (VKey = VK_NUMLOCK) then
    begin
      NumState := ByteBool(GetKeyState(VK_NUMLOCK) and 1);
      GetKeyBoardState(KeyBoardState);
      if NumState then
        KeyBoardState[VK_NUMLOCK] := (KeyBoardState[VK_NUMLOCK] and not 1)
      else
        KeyBoardState[VK_NUMLOCK] := (KeyBoardState[VK_NUMLOCK] or 1);
      SetKeyBoardState(KeyBoardState);
      exit;
    end;

    ScanCode := Lo(MapVirtualKey(VKey, 0));
    for Cnt := 1 to NumTimes do
    begin
      if (VKey in ExtendedVKeys)then
      begin
        KeyboardEvent(VKey, ScanCode, KEYEVENTF_EXTENDEDKEY);
        if (GenUpMsg) then
          KeyboardEvent(VKey, ScanCode, KEYEVENTF_EXTENDEDKEY or KEYEVENTF_KEYUP);
      end
      else
      begin
        KeyboardEvent(VKey, ScanCode, 0);
        if (GenUpMsg) then
          KeyboardEvent(VKey, ScanCode, KEYEVENTF_KEYUP);
      end;
    end;
  end;

  procedure SendKeyUp(VKey: Byte);
  var
    ScanCode: Byte;
  begin
    ScanCode := Lo(MapVirtualKey(VKey, 0));
    if (VKey in ExtendedVKeys) then
      KeyboardEvent(VKey, ScanCode, KEYEVENTF_EXTENDEDKEY and KEYEVENTF_KEYUP)
    else
      KeyboardEvent(VKey, ScanCode, KEYEVENTF_KEYUP);
  end;

  procedure SendKey(MKey: Word; NumTimes: Word; GenDownMsg: Boolean);
  begin
    if (BitSet(Hi(MKey), VKKEYSCANSHIFTON)) then SendKeyDown(VK_SHIFT, 1, False);
    if (BitSet(Hi(MKey), VKKEYSCANCTRLON)) then SendKeyDown(VK_CONTROL, 1, False);
    if (BitSet(Hi(MKey), VKKEYSCANALTON)) then SendKeyDown(VK_MENU, 1, False);
    SendKeyDown(Lo(MKey), NumTimes, GenDownMsg);
    if (BitSet(Hi(MKey), VKKEYSCANSHIFTON)) then SendKeyUp(VK_SHIFT);
    if (BitSet(Hi(MKey), VKKEYSCANCTRLON)) then SendKeyUp(VK_CONTROL);
    if (BitSet(Hi(MKey), VKKEYSCANALTON)) then SendKeyUp(VK_MENU);
  end;

  { Implements a simple binary search to locate special key name strings }

  function StringToVKey(KeyString: ShortString): Word;
  var
    Found, Collided: Boolean;
    Bottom, Top, Middle: Byte;
  begin
    Result := INVALIDKEY;
    Bottom := 1;
    Top := MaxSendKeyRecs;
    Found := False;
    Middle := (Bottom+Top) div 2;
    repeat
      Collided := ((Bottom = Middle) or (Top = Middle));
      if (KeyString = SendKeyRecs[Middle].Name) then
      begin
        Found := True;
        Result := SendKeyRecs[Middle].VKey;
      end
      else
      begin
        if (KeyString > SendKeyRecs[Middle].Name) then
          Bottom := Middle
        else
          Top := Middle;
        Middle := (Succ(Bottom+Top)) div 2;
      end;
    until (Found or Collided);
    if (Result = INVALIDKEY) then DisplayMessage('Invalid Key Name');
  end;

  procedure PopUpShiftKeys;
  begin
    if (not UsingParens) then
    begin
      if ShiftDown then SendKeyUp(VK_SHIFT);
      if ControlDown then SendKeyUp(VK_CONTROL);
      if AltDown then SendKeyUp(VK_MENU);
      ShiftDown := False;
      ControlDown := False;
      AltDown := False;
    end;
  end;

begin
  AllocationSize := MaxInt;
  Result := False;
  UsingParens := False;
  ShiftDown := False;
  ControlDown := False;
  AltDown := False;
  I := 0;
  L := StrLen(SendKeysString);
  if (L > AllocationSize) then L := AllocationSize;
  if (L = 0) then Exit;

  while (I < L) do
  begin
    case SendKeysString[I] of
      '(' :
      begin
         UsingParens := True;
         Inc(I);
      end;
      ')' :
      begin
        UsingParens := False;
        PopUpShiftKeys;
        Inc(I);
      end;
      '%' :
      begin
        AltDown := True;
        SendKeyDown(VK_MENU, 1, False);
        Inc(I);
      end;
      '+' :
      begin
        ShiftDown := True;
        SendKeyDown(VK_SHIFT, 1, False);
        Inc(I);
      end;
      '^' :
      begin
        ControlDown := True;
        SendKeyDown(VK_CONTROL, 1, False);
        Inc(I);
      end;
      '{' :
      begin
        NumTimes:=1;
        if (SendKeysString[Succ(I)] = '{') then
        begin
          MKey := VK_LEFTBRACKET;
          SetBit(Wbytes(MKey)[1], VKKEYSCANSHIFTON);
          SendKey(MKey, 1, True);
          PopUpShiftKeys;
          Inc(I, 3);
          Continue;
        end;
        KeyString := '';
        FoundClose := False;
        while (I <= L) do
        begin
          Inc(I);
          if (SendKeysString[I] = '}') then
          begin
            FoundClose := True;
            Inc(I);
            Break;
          end;
          KeyString := KeyString + Upcase(SendKeysString[I]);
        end;
        if (not FoundClose) then
        begin
          DisplayMessage('No Close');
          Exit;
        end;
        if (SendKeysString[I] = '}') then
        begin
          MKey := VK_RIGHTBRACKET;
          SetBit(Wbytes(MKey)[1], VKKEYSCANSHIFTON);
          SendKey(MKey, 1, True);
          PopUpShiftKeys;
          Inc(I);
          Continue;
        end;
        PosSpace := Pos(' ', KeyString);
        if (PosSpace <> 0) then
        begin
          NumTimes := StrToInt(Copy(KeyString, Succ(PosSpace), Length(KeyString)-PosSpace));
          KeyString := Copy(KeyString, 1, Pred(PosSpace));
        end;
        if (Length(KeyString) = 1) then
          MKey := vkKeyScan(KeyString[1])
        else
          MKey := StringToVKey(KeyString);
        if (MKey <> INVALIDKEY) then
        begin
          SendKey(MKey, NumTimes, True);
          PopUpShiftKeys;
          Continue;
        end;
      end;
      '~' :
      begin
        SendKeyDown(VK_RETURN, 1, True);
        PopUpShiftKeys;
        Inc(I);
      end;
      else
      begin
        MKey := vkKeyScan(SendKeysString[I]);
        if (MKey <> INVALIDKEY) then
        begin
          SendKey(MKey, 1, True);
          PopUpShiftKeys;
        end
        else
          DisplayMessage('Invalid KeyName');
        Inc(I);
      end;
    end;
  end;
  Result := True;
  PopUpShiftKeys;
end;

{ AppActivate

This is used to set the current input focus to a given window using its
name.  This is especially useful for ensuring a window is active before
sending it input messages using the SendKeys function.  You can specify
a window's name in its entirety, or only portion of it, beginning from
the left. }

var
  WindowHandle : HWND;

function EnumWindowsProc(WHandle: HWND; lParam: LPARAM): BOOL; export; stdcall;
const
  MAX_WINDOW_NAME_LEN = 80;
var
  WindowName : array[0..MAX_WINDOW_NAME_LEN] of char;
begin
  { Can't test GetWindowText's return value since some windows don't have a title }
  GetWindowText(WHandle, WindowName, MAX_WINDOW_NAME_LEN);
  Result := (StrLIComp(WindowName, PChar(lParam), StrLen(PChar(lParam))) <> 0);
  if (not Result) then WindowHandle := WHandle;
end;

function AppActivate(WindowName: PChar): boolean;
begin
  try
    Result := True;
    WindowHandle := FindWindow(nil, WindowName);
    if (WindowHandle = 0) then EnumWindows(@EnumWindowsProc, Integer(PChar(WindowName)));
    if (WindowHandle <> 0) then
    begin
      SendMessage(WindowHandle, WM_SYSCOMMAND, SC_HOTKEY, WindowHandle);
      SendMessage(WindowHandle, WM_SYSCOMMAND, SC_RESTORE, WindowHandle);
    end
    else
      Result := False;
  except
    on Exception do Result := False;
  end;
end;

end.


Source: http://www.atbcode.com
ID: 01543
ID: 01551



{ PostKeyEx32 function }

procedure PostKeyEx32(key: Word; const shift: TShiftState; specialkey: Boolean);
{************************************************************
* Procedure PostKeyEx32
*
* Parameters:
*  key    : virtual keycode of the key to send. For printable
*           keys this is simply the ANSI code (Ord(character)).
*  shift  : state of the modifier keys. This is a set, so you
*           can set several of these keys (shift, control, alt,
*           mouse buttons) in tandem. The TShiftState type is
*           declared in the Classes Unit.
*  specialkey: normally this should be False. Set it to True to
*           specify a key on the numeric keypad, for example.
* Description:
*  Uses keybd_event to manufacture a series of key events matching
*  the passed parameters. The events go to the control with focus.
*  Note that for characters key is always the upper-case version of
*  the character. Sending without any modifier keys will result in
*  a lower-case character, sending it with [ssShift] will result
*  in an upper-case character!
// Code by P. Below
************************************************************}
type
  TShiftKeyInfo = record
    shift: Byte;
    vkey: Byte;
  end;

  byteset = set of 0..7;

const
  shiftkeys: array [1..3] of TShiftKeyInfo =
    ((shift: Ord(ssCtrl); vkey: VK_CONTROL),
    (shift: Ord(ssShift); vkey: VK_SHIFT),
    (shift: Ord(ssAlt); vkey: VK_MENU));
var
  flag: DWORD;
  bShift: ByteSet absolute shift;
  i: Integer;
begin
  for i := 1 to 3 do
  begin
    if shiftkeys[i].shift in bShift then
      keybd_event(shiftkeys[i].vkey, MapVirtualKey(shiftkeys[i].vkey, 0), 0, 0);
  end; { For }
  if specialkey then
    flag := KEYEVENTF_EXTENDEDKEY
  else
    flag := 0;

  keybd_event(key, MapvirtualKey(key, 0), flag, 0);
  flag := flag or KEYEVENTF_KEYUP;
  keybd_event(key, MapvirtualKey(key, 0), flag, 0);

  for i := 3 downto 1 do
  begin
    if shiftkeys[i].shift in bShift then
      keybd_event(shiftkeys[i].vkey, MapVirtualKey(shiftkeys[i].vkey, 0),
        KEYEVENTF_KEYUP, 0);
  end; { For }
end; { PostKeyEx32 }


// Example:

procedure TForm1.Button1Click(Sender: TObject);
begin
  //Pressing the Left Windows Key
  PostKeyEx32(VK_LWIN, [], False);

  //Pressing the letter D
  PostKeyEx32(Ord('D'), [], False);

  //Pressing Ctrl-Alt-C
  PostKeyEx32(Ord('C'), [ssctrl, ssAlt], False);
end;


Source: Взято с сайта: http://www.swissdelphicenter.ch
ID: 01544



С использованием keybd_event, простой пример[править | править код]

{
With keybd_event API}

procedure TForm1.Button1Click(Sender: TObject);
begin
  { or you can also try this simple example to send any
  amount of keystrokes at the same time. }

  { Pressing the A Key and showing it in the Edit1.Text }

  Edit1.SetFocus;
  keybd_event(VK_SHIFT, 0, 0, 0);
  keybd_event(Ord('A'), 0, 0, 0);
  keybd_event(VK_SHIFT, 0, KEYEVENTF_KEYUP, 0);

  { Presses the Left Window Key and starts the Run }
  keybd_event(VK_LWIN, 0, 0, 0);
  keybd_event(Ord('R'), 0, 0, 0);
  keybd_event(VK_LWIN, 0, KEYEVENTF_KEYUP, 0);
end;


Source: Взято с сайта: http://www.swissdelphicenter.ch
ID: 01545



С использованием keybd_event, с управляющими клавишами[править | править код]

{With keybd_event API}

procedure PostKeyExHWND(hWindow: HWnd; key: Word; const shift: TShiftState;
  specialkey: Boolean);
{************************************************************
* Procedure PostKeyEx
*
* Parameters:
*  hWindow: target window to be send the keystroke
*  key    : virtual keycode of the key to send. For printable
*           keys this is simply the ANSI code (Ord(character)).
*  shift  : state of the modifier keys. This is a set, so you
*           can set several of these keys (shift, control, alt,
*           mouse buttons) in tandem. The TShiftState type is
*           declared in the Classes Unit.
*  specialkey: normally this should be False. Set it to True to
*           specify a key on the numeric keypad, for example.
*           If this parameter is true, bit 24 of the lparam for
*           the posted WM_KEY* messages will be set.
* Description:
*  This procedure sets up Windows key state array to correctly
*  reflect the requested pattern of modifier keys and then posts
*  a WM_KEYDOWN/WM_KEYUP message pair to the target window. Then
*  Application.ProcessMessages is called to process the messages
*  before the keyboard state is restored.
* Error Conditions:
*  May fail due to lack of memory for the two key state buffers.
*  Will raise an exception in this case.
* NOTE:
*  Setting the keyboard state will not work across applications
*  running in different memory spaces on Win32 unless AttachThreadInput
*  is used to connect to the target thread first.
*Created: 02/21/96 16:39:00 by P. Below
************************************************************}

type
  TBuffers = array [0..1] of TKeyboardState;
var
  pKeyBuffers: ^TBuffers;
  lParam: LongInt;
begin
  (* check if the target window exists *)
  if IsWindow(hWindow) then
  begin
    (* set local variables to default values *)
    pKeyBuffers := nil;
    lParam := MakeLong(0, MapVirtualKey(key, 0));

    (* modify lparam if special key requested *)
    if specialkey then
      lParam := lParam or $1000000;

    (* allocate space for the key state buffers *)
    New(pKeyBuffers);
    try
      (* Fill buffer 1 with current state so we can later restore it.
         Null out buffer 0 to get a "no key pressed" state. *)
      GetKeyboardState(pKeyBuffers^[1]);
      FillChar(pKeyBuffers^[0], SizeOf(TKeyboardState), 0);

      (* set the requested modifier keys to "down" state in the buffer*)
      if ssShift in shift then
        pKeyBuffers^[0][VK_SHIFT] := $80;
      if ssAlt in shift then
      begin
        (* Alt needs special treatment since a bit in lparam needs also be set *)
        pKeyBuffers^[0][VK_MENU] := $80;
        lParam := lParam or $20000000;
      end;
      if ssCtrl in shift then
        pKeyBuffers^[0][VK_CONTROL] := $80;
      if ssLeft in shift then
        pKeyBuffers^[0][VK_LBUTTON] := $80;
      if ssRight in shift then
        pKeyBuffers^[0][VK_RBUTTON] := $80;
      if ssMiddle in shift then
        pKeyBuffers^[0][VK_MBUTTON] := $80;

      (* make out new key state array the active key state map *)
      SetKeyboardState(pKeyBuffers^[0]);
      (* post the key messages *)
      if ssAlt in Shift then
      begin
        PostMessage(hWindow, WM_SYSKEYDOWN, key, lParam);
        PostMessage(hWindow, WM_SYSKEYUP, key, lParam or $C0000000);
      end
      else
      begin
        PostMessage(hWindow, WM_KEYDOWN, key, lParam);
        PostMessage(hWindow, WM_KEYUP, key, lParam or $C0000000);
      end;
      (* process the messages *)
      Application.ProcessMessages;

      (* restore the old key state map *)
      SetKeyboardState(pKeyBuffers^[1]);
    finally
      (* free the memory for the key state buffers *)
      if pKeyBuffers <> nil then
        Dispose(pKeyBuffers);
    end; { If }
  end;
end; { PostKeyEx }

// Example:

procedure TForm1.Button1Click(Sender: TObject);
var
  targetWnd: HWND;
begin
  targetWnd := FindWindow('notepad', nil)
    if targetWnd <> 0 then
    begin
      PostKeyExHWND(targetWnd, Ord('I'), [ssAlt], False);
  end;
end;


Source: Взято с сайта: http://www.swissdelphicenter.ch
ID: 01546



Использование SendInput[править | править код]

{ With SendInput API }

// Example: Send text 
procedure TForm1.Button1Click(Sender: TObject);
const
  Str: string = 'writing writing writing';
var
  Inp: TInput;
  I: Integer;
begin
  Edit1.SetFocus;

  for I := 1 to Length(Str) do
  begin
    // press
    Inp.Itype := INPUT_KEYBOARD;
    Inp.ki.wVk := Ord(UpCase(Str[i]));
    Inp.ki.dwFlags := 0;
    SendInput(1, Inp, SizeOf(Inp));

    // release
    Inp.Itype := INPUT_KEYBOARD;
    Inp.ki.wVk := Ord(UpCase(Str[i]));
    Inp.ki.dwFlags := KEYEVENTF_KEYUP;
    SendInput(1, Inp, SizeOf(Inp));

    Application.ProcessMessages;
    Sleep(80);
  end;
end;

// Example: Simulate Alt+Tab
procedure SendAltTab;
var
  KeyInputs: array of TInput;
  KeyInputCount: Integer;

  procedure KeybdInput(VKey: Byte; Flags: DWORD);
  begin
    Inc(KeyInputCount);
    SetLength(KeyInputs, KeyInputCount);
    KeyInputs[KeyInputCount - 1].Itype := INPUT_KEYBOARD;
    with  KeyInputs[KeyInputCount - 1].ki do
    begin
      wVk := VKey;
      wScan := MapVirtualKey(wVk, 0);
      dwFlags := KEYEVENTF_EXTENDEDKEY;
      dwFlags := Flags or dwFlags;
      time := 0;
      dwExtraInfo := 0;
    end;
  end;
begin
  KeybdInput(VK_MENU, 0);                // Alt
  KeybdInput(VK_TAB, 0);                 // Tab
  KeybdInput(VK_TAB, KEYEVENTF_KEYUP);   // Tab
  KeybdInput(VK_MENU, KEYEVENTF_KEYUP);  // Alt
  SendInput(KeyInputCount, KeyInputs[0], SizeOf(KeyInputs[0]));
end;


Source: Взято с сайта: http://www.swissdelphicenter.ch
ID: 01547



Передача символа в TMemo[править | править код]

Memo1.Perform(WM_CHAR, Ord('A'), 0);

или

SendMessage(Memo1.Handle, WM_CHAR, Ord('A'), 0);


Source: http://delphiworld.narod.ru/
ID: 01548



Эмуляция нажатия клавиши в активном окне[править | править код]

{ **** UBPFD *********** by delphibase.endimus.com ****
>> Эмуляция нажатия клавиши в активном окне

VKey - код виртуальной клавиши (см. описание констант VK_xxxx)

Зависимости: Windows

Copyright:   Dimka Maslov
Дата:        29 апреля 2002 г.
***************************************************** }

procedure PressKey(VKey: Byte);
begin
  keybd_event(VKey, 0, 0, 0);
  keybd_event(VKey, 0, KEYEVENTF_KEYUP, 0);
end;


Source: http://delphibase.endimus.com
ID: 01549



Эмуляция нажатия клавиши в любом окне, в т.ч. неактивном[править | править код]

{ **** UBPFD *********** by delphibase.endimus.com ****
>> Эмуляция нажатия клавиши в любом окне, в т.ч. неактивном

Процедура эмулирует нажатие клавиши в любом окне путём посылки ему пары
сообщений WM_KEYDOWN и WM_KEYUP. Процедура принимает два параметра -
Handle окна и код клавиши (см. описание констант VK_xxxx).

Зависимости: Windows

Copyright:   Dimka Maslov
Дата:        29 апреля 2002 г.
***************************************************** }

procedure EmulateKey(Wnd: HWND; VKey: Integer);
asm
   push 0
   push edx
   push 0101H //WM_KEYUP
   push eax
   push 0
   push edx
   push 0100H //WM_KEYDOWN
   push eax
   call PostMessage
   call PostMessage
end;

// Пример использования:
EmulateKey(Edit1.Handle, VK_RETURN);


Source: http://delphibase.endimus.com
ID: 01550



Как отправить нажатие клавиши с кодом 255 в элемент управления Windows[править | править код]

Функция keybd_event() принимает значения до 244 - как мне отправить нажатие клавиши с кодом #255 в элемент управления Windows? Это может понадобится для иностранных языков или для специальных символов. (например, в русских шрифтах символ с кодом #255 - я прописное). Приведенный в примере метод, не стоит использовать в случае если символ может быть передан обычным способом (функцией keybd_event()).


procedure TForm1.Button1Click(Sender: TObject);
var
  KeyData: packed record
    RepeatCount: Word;
    ScanCode: Byte;
    Bits: Byte;
  end;
begin
  { Let the button repaint }
  Application.ProcessMessages;
  { Set the focus to the window }
  Edit1.SetFocus;
  { Send a right so the char is added to the end of the line }
  // SimulateKeyStroke(VK_RIGHT, 0);
  keybd_event(VK_RIGHT, 0, 0, 0);
  { Let the app get the message }
  Application.ProcessMessages;
  FillChar(KeyData, sizeof(KeyData), #0);
  KeyData.ScanCode := 255;
  KeyData.RepeatCount := 1;
  SendMessage(Edit1.Handle, WM_KEYDOWN, 255, LongInt(KeyData));
  KeyData.Bits := KeyData.Bits or (1 shl 30);
  KeyData.Bits := KeyData.Bits or (1 shl 31);
  SendMessage(Edit1.Handle, WM_KEYUP, 255, LongInt(KeyData));
  KeyData.Bits := KeyData.Bits and not (1 shl 30);
  KeyData.Bits := KeyData.Bits and not (1 shl 31);
  SendMessage(Edit1.Handle, WM_CHAR, 255, LongInt(KeyData));
  Application.ProcessMessages;
end;


Source: http://delphiworld.narod.ru/
ID: 01552